How do I know if my blower motor is bad?
What Are Signs Your Blower Motor Needs to Be Replaced?
- Poor or Airflow from Air Vents. This will be the first and most obvious sign your blower motor has a problem. …
- No Airflow At All From Vents. …
- Skyrocketing Energy Bills. …
- Strange Noises When You Turn on the Heat. …
- Overheating Blower / Weird Smells.
How do you tell if it’s the blower motor or resistor is bad?
Symptoms of a bad heater blower motor resistor
- Fan does not work at all, so no air comes out of the vents.
- Fan only works on some speeds and not others.
- Fan only works on the highest speed.
- Fan runs all the time and can’t be controlled with the fan switch.
- You see smoke coming out of the vents.
What can cause a blower motor to stop working?
In a situation where the motor doesn’t work on any speed, the most likely causes are: a blown power supply fuse, a bad motor ground connection, bad motor speed control module or a failed motor. On all systems, a failed blower motor is least likely.
What happens when blower motor relay goes bad?
If you have a faulty blower motor, you may experience low airflow from the vents, even when the fan is on high. There will be no air coming from the vents if your fan isn’t working due to a bad blower motor resistor.
How much does it cost to replace a blower motor?
Replacing a blower motor costs $450 on average with a typical range of $250 to $800. With a warranty, you might pay as little as $150 for labor alone. For high-end models, like those with large motors or access issues, you might pay as much as $2,000.
What happens when blower motor resistor goes bad?
If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.
Can a blower motor be repaired?
There are a number of things that can go wrong with your heating system, but if the air stops blowing altogether and the same is true on cold air settings, a blower motor replacement is likely in order. The good news is that it’s a fairly straight forward repair.
How much does it cost to replace a blower motor resistor?
Blower Motor Resistor Replacement Cost – RepairPal Estimate. Labor costs are estimated between $44 and $55 while parts are priced between $64 and $82. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
How do you test a blower motor relay?
Connect a test light or multimeter to the ground (black lead). Turn the ignition key to the on position (engine off), and remove the relay. Using the probe, test all terminal sockets in the relay connector. Two of the four should have power.
Why do fan motors fail?
The main causes of failure are loss of lubricant, a failed run capacitor, a failed bearing in a belt drive, a little water dripping into the windings or a voltage problem. So technicians should carefully check to find the cause of a failure before changing the motor.