What are the two ways that you start a turbine engine?
Gas turbine aircraft engines such as turbojets, turboshafts and turbofans often use air/pneumatic starting, with the use of bleed air from built-in auxiliary power units (APUs) or external air compressors now seen as a common starting method. Often only one engine needs be started using the APU (or remote compressor).
What is the proper starting sequence for a turbine engine?
The normal starting sequence is: Rotate the compressor with the starter; Turn the ignition on; and. Open the engine fuel valve, either by moving the throttle to idle or by moving a fuel shutoff lever or turning a switch.
What types of gas turbine engines would typically use an electric starter?
Electric starting systems for gas turbine aircraft are of two general types: direct cranking electrical systems and starter generator systems. Direct cranking electric starting systems are used mostly on small turbine engines, such as Auxiliary Power Units (APUs), and some small turboshaft engines.
What is meant by a shrouded turbine?
A ‘shrouded’, ‘cowled’, ‘ducted’ or ‘wind lens‘ turbine is one that is housed in a ring-shaped aerofoil that increases airflow through the turbine blades’ swept area by generating a localised ring vortex.
What should be done initially if a turbine engine catches fire when starting group of answer choices?
64 (8171) – What should be done initially if a turbine engine catches fire when starting? A– Turn off the fuel and continue engine rotation with the starter.
What is the role and importance of the starter in starting a turbine engine?
Usually the starter (also the generator) drives the HP turbine/compressor assembly (N2) to a sufficiently high RPM and airflow so that when fuel is added and ignited it will lite up and accelerate to idle RPM (around 55% N2) and is then self sustaining.