Is the 4T65E transmission reliable?

How much does it cost to rebuild a 4T65E transmission?

Around here a stock 4T65E rebuild runs $1200-$1600 plus install and seems to be on the average for a stock rebuild. In Chicago I have heard $2600 plus install. It will vary throughout the country. These are local transmission shop prices and not dealer or Jasper install centers.

What cars use a 4T65E transmission?

Vehicles manufactured with 4T65-E transmissions include:

  • Chevrolet Impala.
  • Chevy Malibu.
  • Pontiac Aztek.
  • Chevy Uplander.
  • Buick Regal.
  • Chevy Venture.
  • Pontiac Grand Prix.
  • Buick Rendezvous.

How much does a 4T65E transmission weigh?

Transmission General Specifications

Name Hydra-matic 4T65-E
Transaxle Weight Dry 87.9 kg (194.2 lbs)
Transaxle Weight Wet 97.0 kg (214.4 lbs)
Maximum Trailer Towing Capacity 907 kg (2000 lbs)
Maximum Gross Vehicle Weight (GVW) 2903 kg (6,400 lbs)

Is it cheaper to rebuild or replace a transmission?

A transmission rebuild will be less costly and not done on the factory level. In addition, you or the mechanic will be putting in new parts like the seals, gaskets, clutch, and bands. … The auto repair shop will have to take apart the transmission and clean the parts before considering whether to put them back in or not.

IT IS INTERESTING:  Quick Answer: How many ah does a car battery have?

Is it worth fixing a transmission?

Rebuilding a transmission can save you a lot of money over the short-term, while keeping car payments out of your monthly budget. For many, rebuilding their transmission is worth the initial cost. Rebuilding a transmission may cost you twenty-five hundred dollars or more, which is a significant chunk of change.

How much power can a 4T65E transmission handle?

Registered. A stock tranny should hold about 300 WHP, as long as the shifts aren’t too harsh. Otherwise the IS will snap. As long as you keep the shifting reasonable and start raising the power gradually, IMO the chain will go first.

What is the difference between 4T60E and 4T65E?

The 4t65e is inherently stronger than a 4t60e; but lack of auxiliary cooler, cheap seals without enough lip, poor PCS design/placement, and non-hardened parts where they are needed all contribute to early failures of these units. All of this is correctable with aftermarket parts (upgrades, shift kits, etc.)

What is the difference between a 4T65E and an 4T65E HD?

Physically they are about the same and internally identical but there is really not much at all that interchanges between the two. The big enhancement to the 4T65E was that it uses a pressure control solenoid so the pcm can control line pressure instead of using a vacuum line like the older 4T60E.

How many shift solenoids are in a 4T65E transmission?

For GM 4T65E 5 Piece Solenoid Set, 1 Pressure Switch Style.

How much does a 4T60E transmission weigh?

-4T60E 4 speed- 159 lb. -Manual flywheel, pressure plate, and clutch disc- 35lb.

IT IS INTERESTING:  How do you remove a car engine?

What kind of transmission does a 2006 Chevy Impala have?

The 2006 Chevrolet Impala takes Dexron VI; 1 Quart; Valvoline DEXRON(R)-VI ATF is formulated with premium synthetic base stocks and advanced additive technology, meeting and exceeding the requirements of the General Motors.

What kind of transmission do I have?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.