What engines bolt to a C6 transmission?
What engines will a C6 transmission fit? The C6 was an automatic transmission used on engines such as the 351 Cleveland and the Ford 385 engines. Some well-known applications of the C6 transmission are the Ford Torino, Thunderbird and Mustang (This transmission has no relation the C6 Corvette).
Will a Ford 302 bolt up to a C6 transmission?
Premium Member. The C6 will physically bolt onto either the 289 or 302 but I don’t think it will fit the 66 tunnel without some modification to the tunnel. It should fit the 68 tunnel fine, since a big block with a C6 was available that year.
What transmission goes with a 302?
For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.
Will a C6 transmission fit a 300?
Registered. 300/C6 will be fine.
Will a 351C bolt to a C6 transmission?
Sorry the 351 C uses a small block bolt pattern on the trans the 351 M uses a big block bolt pattern and will swap with no problem. You can use your internal components from your current C6 in a big block C6.
Which is better C4 or C6 transmission?
The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.
Will a C6 transmission fit a 351W?
— No, that 351W will not bolt onto your 351M C6. — No, all 351W engines used the 351W bellhousing pattern, shared by the 302, 289, and 300-I6. — Your C6 uses a pattern shared by the 351C, 351M/400M (same engine block), and 429/460.
How many speeds is a C6 transmission?
The C6 is a non-electronic, three-speed transmission. The AOD features a four-speed, non-electronic transmission. It was not until 1992 that Ford introduced the electronic version of the AOD, the AODE.
Will a C4 transmission fit a 390?
Registered. No a stock C-4 cannot handle the torque of a 390.
Will a 351 transmission fit a 302?
That means that almost all parts swap between a 302 and a 351. This includes: Heads, cam, lifters, timing chain, timing chain cover, water pump, engine mounts, and all sorts of other stuff. The bellhousing bolt pattern is the same as a 302, so all trannies that bolt to a 302 will bolt to a 351.
Is a Ford C6 transmission any good?
The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6. A lot of the problems came from the programming.
Will a T5 transmission fit a 302?
A T5 will work with any 302 motor. The bolt pattern hasn’t changed since 1965.
Does a Ford 300 and a 302 have same bellhousing?
240/300/302/351w 3.8L are all the same bellhousing..
How do I identify a NP435 transmission?
New Process NP435 Manual Transmission
The most common NP435 transmissions feature a desirable 6.69 to 1 first gear ratio and relatively low 8.26 to 1 reverse ratio. It uses a standard “H” shift pattern, with reverse found to the right and down; it can be identified by its 8 bolt aluminum top cover and cast iron case.