What size wire is needed for a 36 volt trolling motor?

What gauge wire should I use for a 36 volt trolling motor?

Eight gage wire is fine for the length of the original wire. If you can hook the original wire directly to the batteries it will be fine. However, you will be increasing the run if you add more wire, therefore you also have to increase the size to 6 gage. That makes sense thanks.

What gauge wire do Minn Kota trolling motors use?

CONDUCTOR GAUGE AND CIRCUIT BREAKER SIZING TABLE

MOTOR THRUST/MODEL MAX AMP DRAW WIRE EXTENSION LENTH
5 FT
30 lb. 30 10 AWG
40 lb., 45 lb. 42 10 AWG
50 lb., 55 lb. 50 8 AWG

How many amps does a trolling motor pull?

Thrust Trolling Motor has a max amp draw of 52 amps/hr but only 5 lbs more thrust. 3. Because of the larger windings in the 50 lb thrust model, lower speeds use less amperage for the same thrust.

Does a trolling motor need a circuit breaker?

It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor. … For motors requiring a 60-amp breaker, the Minn Kota MKR-19 60-amp circuit breaker is recommended.

IT IS INTERESTING:  How can we stop engine oil consumption?

How many batteries do I need for a trolling motor?

If you have a trolling motor on your boat, you will require usually two to three deep-cycle batteries to power it. Unlike gasoline-powered engines, trolling motors run on stored battery power.

Can you run 2 batteries on a 12v trolling motor?

Yes, it will charge both batteries. You may want to considering buying 2 new batteries to do this with. If you put two different batteries or one old & one new, it will pull off one faster than the other. I have 2 12 volt batteries hooked up in parrallel (pos to pos and neg to neg).

Why does my trolling motor have 3 wires?

The three wires are for a trolling motor that will operate on either 12 volts or 24 volts. 12/24 volt motors have a switch to choose which you want. Thus the third wire to send power to the 24 volt side of the switch. The red and black wires operate the 12 volt side.

Will 24v trolling motor run on 12v?

24v hooked to 12v will spin for a while on a full battery but there will be no torque. You could stop it with your hand. It is like running your motor with half the spark plugs missing.

How long will a 24 volt trolling motor last?

However, a 24-volt trolling motor should last at least 8-10 hours and may last up to several days before you need new or recharged batteries.