How do I identify a C6 transmission?
The bell housing gradually tapers down in size from the back of the engine to the center, or “body,” of the transmission. Look for a seam between the bell housing and the body of the transmission. If no seam exists, the transmission is a C6.
What did the C6 transmission come in?
Also, the C6 transmission was used in high-performance vehicles as well as trucks with more significant engines such as Ford trucks, passenger cars, and Lincoln cars. The C6 was evident in the Ford F-Series between 1967 to 1996 as well as the Ford Bronco between 1978 to 1991.
How much HP can a C6 transmission handle?
The new planetaries bring the transmission’s rating to more than 2,000 hp, provided the input shaft has been swapped. Like all aftermarket transmission builds, the new clutch packs have better surface material and additional clutches for greater gripping power.
Is a Ford C6 transmission any good?
The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6. A lot of the problems came from the programming.
Which transmission is better C4 or C6?
The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.
Will a C6 transmission bolt a 302?
Also , will a C6 tranny fit behind a 302 ? Yes, but not the one from the FE. Best bet is out of a later model 2WD truck. Unless you’re really flogging the car, I’d not use a C6 – they’re big, heavy, and eat more HP to turn than any other of your available trans options, but they are strong.
When did Ford stop making the C6 transmission?
The C4 and C6 are medium and heavy duty automatic transmissions produced by Ford Motor Company. The C4 was introduced in 1964 and retired after 1981, while the C6 made its debut in 1966 and renditions of the transmission were used through 1996 in certain applications.
How strong is a C6 transmission?
The final C6 transmission manifestation was the Mega Dominator model, the most powerful transmission of the four. It uses a 1,200 horsepower, 1,000 torque nM torque converter and it has stall speeds of between 2,600 rpm and 6,000 rpm.
Will a C6 transmission fit a 351W?
— No, that 351W will not bolt onto your 351M C6. — No, all 351W engines used the 351W bellhousing pattern, shared by the 302, 289, and 300-I6. — Your C6 uses a pattern shared by the 351C, 351M/400M (same engine block), and 429/460.
Will a C6 transmission fit a 460?
No, C6 transmissions are engine family specific as the bellhousing & trans are a one piece casting ie, small block C6 will only fit Cleveland or Windsor, FE (390 etc) will only fit FE, & 385 series (429, 460 etc) will only fit these engines (but will also suit 351M & 400M).
What type of fluid does a C6 transmission take?
It requires 7-quarts of Type FA transmission fluid with the stock pan, plus an additional 2–4 quarts for the torque converter.
How can I improve my C6 transmission?
You can try the following to beef up the performance of your C6 transmission:
- Custom Parts. …
- Valve Body Upgrades. …
- Bell Housings. …
- C6 Planetary Carriers. …
- First and Reverse Planetary Gearset. …
- Lincoln Drum. …
- Aftermarket Clutches. …
- Gear Ratios.
How much HP can a C4 transmission handle?
A built C4 for the street will hold 500HP, and a race C4 will hold over 700HP, but unfortunately the stock C4 behind a 450HP motor isn’t going to last long, do yourself a favor and rebuild the one you have.